|
|
| Hardware
|
| |
| Bolts, u-bolts, threaded rods, shackles, anchors, washers, nuts and other fastener-related products. |
|
|
|
| Hex Bolts
|
| |
| Hex bolts (six sided heads) are the industry standard for fasteners with forged heads required for use in general steel-to-steel applications. |
|
|
| Threaded Rod/Studs
|
| |
| Threaded rods/studs are used for general purpose fastening for anything from anchor bolts to through bolts. |
|
|
| U-Bolts (round bend)
|
| |
| Bolts, shaped like the letter “U” and threaded on both legs, used for hanging pipe & connecting items to posts. |
|
|
| V-Bolts (v-shape bend)
|
| |
| Bolts shaped like the letter “V” and are threaded on both legs. V-bolts are used for attaching various materials to angle members. |
|
|
| J-Bolts (check bolts)
|
| |
| Checkmark shaped bolts, partially threaded on the longer leg, are commonly used to draw angle members (cable ladder) close to the face of existing structures (towers). |
|
|
| Anchor Bolts (wedge anchors)
|
| |
| Any bolt (straight rod, headed bolt, bent bolt) which is embedded in concrete and used for anchorage purposes. Our wedge bolts are one-piece, easy to install expansion anchors. |
|
|
| Flat Washers
|
| |
| Thin, round steel component with a hole for a bolt or threaded rod to pass through. Can also be used under a nut and/or under the head of a bolt to provide a smooth bearing surface. |
|
|
| Square Washers
|
| |
| Thick, square steel component with a hole for a bolt or threaded rod to pass through. Can also be used under a nut and/or under the head of a bolt to provide a smooth bearing surface. |
|
|
| Split Lock Washers
|
| |
| Slightly offset, round steel component with a pass through hole used to prevent a nut from loosening on threaded hardware. |
|
|
| Threaded Couplers
|
| |
| Hex shaped, internally threaded mechanical fasteners used to connect two pieces of similar diameter threaded rods/studs. |
|
|
| Hex Nuts
|
| |
| Hex shaped, internally threaded mechanical fastener component used with threaded rods, studs and bolts. |
|
|
| Shackles
|
| |
| Forged, galvanized steel clamps featuring screw-in pin anchors used for affixing (tying off) hoisting grips on tower structures. |
|
|
|
|
